Equipment Power Tools Cordless vs 12V Tire Inflator: Which Power Source Works Where You Park

Cordless vs 12V Tire Inflator: Which Power Source Works Where You Park

0

When a tire goes low, the right power source is the one that works where your car is parked. “Cordless” means a battery runs the inflator. “12V” means it runs on 12-volt DC power, like the clamp units and the DeWalt’s 12V DC cord. The two overlap, so you pick by what you already own. Milwaukee’s 2848-20 or Ryobi’s PCL001B run on tool batteries. DeWalt’s DCC020IB runs on a 20V MAX battery, 12V DC or 110V AC. VIAIR’s 88P and 400P-RV clamp to the car battery. Fanttik’s X8 APEX has a built-in battery. We have not tested any of these inflators. This is desk research, built from each maker’s own product page and federal and consumer guidance on tire pressure.

Four Ways an Inflator Gets Its Power

Tool battery. Milwaukee says its Milwaukee 2848-20 M18 inflator “Fits All M18 Batteries,” and the battery is not in the box. Ryobi’s Ryobi PCL001B 18V ONE+ inflator runs on the 18V ONE+ system, so you need a battery from that system to use it.

12V DC, 20V MAX battery or 110V AC. DeWalt says its DeWalt DCC020IB 20V MAX inflator “can run on any one of three power sources”: a 20V MAX battery, 12V DC, or 110V AC. The 12V DC powercord is in the box. The battery, charger and AC power adapter are sold separately.

Battery clamps. VIAIR’s VIAIR 88P portable compressor and VIAIR 400P-RV automatic compressor are both listed as 12-volt compressors with dual battery clamps.

Built-in battery. Fanttik’s Fanttik X8 APEX tire inflator carries its own rechargeable battery, which Fanttik lists at 28.8Wh.

Here’s the quick version.

Power type Model (maker) What the maker’s page lists
Tool battery Milwaukee 2848-20 (M18) Fits all M18 batteries; battery not in the box
Tool battery Ryobi PCL001B (18V ONE+) Tool-only listing; kit PCL001K1 adds a 2Ah battery and charger
20V MAX battery, 12V DC or 110V AC DeWalt DCC020IB Battery, charger and AC adapter sold separately; 12V DC powercord included
Battery clamps VIAIR 88P 12-volt; dual battery clamps; max amp draw 20 A
Battery clamps VIAIR 400P-RV 12-volt; dual battery clamps with inline fuse; max amp draw 30 A
Built-in battery Fanttik X8 APEX 28.8Wh battery; charged with a certified 5V/3A adapter and the included cable

Clamps on the Car Battery: Amp Draw and Your Power Port

For clamp units, the number to check is max amp draw. VIAIR lists 20 amps for the 88P and 30 amps for the 400P-RV. The 400P-RV’s heavy-duty dual battery clamps include an inline fuse.

VIAIR’s own page says: “Always check your vehicle’s power port rating for maximum amperage before ordering.” Find that rating in your vehicle owner’s manual, then compare it with the amp draw above. Don’t skip this step.

Reach: Cord and Hose Length

Two lengths decide how far you can work from the power source: the power cord and the air hose.

Model Power cord Air hose
VIAIR 88P 10 ft 16 ft
VIAIR 400P-RV 8 ft 30 ft primary, plus 30 ft extension hose
Milwaukee 2848-20 — 36 in

Measure from where the power connects to the low tire before you choose.

Tool Batteries: Only Useful if Charged and Compatible

A tool battery only helps if it’s charged and fits the inflator. Milwaukee says the 2848-20 fits all M18 batteries. The battery isn’t in the box, so you need one you already own or buy separately.

The Ryobi PCL001B works with the 18V ONE+ system. Ryobi’s own answer on its product page says: “No, this inflator is not designed for high-volume applications.” That matters if you’re filling several large tires.

The DeWalt DCC020IB uses a 20V MAX battery. The battery, charger and AC power adapter are sold separately, and the 12V DC cord is included.

Ryobi also lists a kit, part number PCL001K1, that adds a 2Ah battery and charger. To compare all six models side by side, see our portable tire inflator comparison.

Built-In Battery: Charging Time and Temperature

Fanttik says the X8 APEX takes about 2 to 2.5 hours to reach a full charge. Use a certified 5V/3A adapter and the included charging cable, the maker says.

Fanttik gives the working range as 14°F to 113°F, and says to store the unit in a dry and secure place. Fanttik also says that under typical outdoor temperatures, the X8 APEX can work continuously for up to 40 minutes from a full charge.

A built-in battery means nothing connects to the car. To check fit with your vehicle’s tires and valves, use our tire inflator compatibility checklist.

Cold Weather and Where You Store It

Temperature limits differ by type. VIAIR lists -4°F as the minimum and +158°F as the maximum ambient temperature for both the 88P and the 400P-RV.

For the 400P-RV, VIAIR says the included air hose “is not recommended in sub zero or freezing conditions.” VIAIR also says the hose “may become brittle from prolonged exposure to UV/sunlight,” so stow it when you’re not using it.

Fanttik’s X8 APEX has the same 14°F to 113°F range noted above, and it needs a dry, secure storage spot.

NHTSA’s tire pressure guidance says to check the pressure of all tires, including your spare, at least once a month when the tires are cold, meaning the car hasn’t been driven for at least three hours.

Which Power Source Fits Your Situation

  • If you already own a tool battery system, a matching inflator keeps you on batteries you have. The Milwaukee 2848-20 fits M18 batteries, the Ryobi PCL001B runs on 18V ONE+, and the DeWalt DCC020IB runs on a 20V MAX battery.
  • If you want nothing to charge, the VIAIR clamp units connect to the car battery, so there’s no separate battery to charge.
  • If you’re inflating an RV or several large tires, VIAIR describes the 400P-RV as “Tailored for RV: Many tires, high pressure, long reach.” It lists a 30-amp max draw, a 30 ft primary hose and a 30 ft extension hose. Ryobi says its inflator is not designed for high-volume applications.
  • If the low tire is far from where you can reach the battery, the 10 ft cord on the 88P and the 8 ft cord on the 400P-RV set how far the compressor can sit from the battery. A built-in battery needs no connection to the car, but it has to be charged first.

How Much Air Pressure Does Your Tire Need?

Use the number for your car, not the tire. NHTSA says the correct pressure is what the vehicle manufacturer has listed, not what is listed on the tire itself. You’ll find it on the Tire and Loading Information Label on the driver’s side door edge, or in your owner’s manual. Fanttik’s FAQ says most vehicles sit “typically around 30 to 35psi,” depending on the vehicle’s weight.

Don’t fill to the number on the sidewall. fueleconomy.gov says: “Do not use the maximum pressure printed on the tire’s sidewall.”

Why Does Tire Pressure Matter So Much?

The U.S. Department of Energy and the U.S. Environmental Protection Agency run fueleconomy.gov’s gas mileage tips. That page says you can improve your gas mileage by 0.6% on average, and up to 3% in some cases, by keeping your tires at the proper pressure. It says under-inflated tires can lower gas mileage by about 0.2% for every 1 psi drop in the average pressure of all tires. It also says properly inflated tires are safer and last longer.

NHTSA says proper tire pressure “affects safety, their durability, and your fuel consumption.”

Can a Tire Inflator Kit Fix a Flat?

The AAA tire inflator kit fact sheet is about kits that some vehicles carry in place of a spare tire. It is not about the portable inflators in this article. Within that scope, AAA says kits “can only be used when a puncture occurs on the center tire tread and the object remains in the tire.” It says they cannot be used when the object is no longer in the tire, or when sidewall, blowout, pothole or curb-related damage occurs.

AAA also says the cost to repair a tire after using a kit “can be as much as 10 times greater than using a spare tire.” It advises reading the owner’s manual and understanding the system’s limits before you need it.

Before You Order: Buyer Checklist

  • Find your vehicle’s power port rating in the owner’s manual, and compare it with the amp draw before you order a clamp unit.
  • Confirm which battery system you own: M18 for the Milwaukee 2848-20, 18V ONE+ for the Ryobi PCL001B, or 20V MAX for the DeWalt DCC020IB.
  • Check whether a battery and charger come in the box. The Milwaukee’s battery isn’t included, and the DeWalt’s battery, charger and AC adapter are sold separately. The Ryobi PCL001B is tool only; the PCL001K1 kit adds a 2Ah battery and charger.
  • Measure from the power source to the tire, and compare the distance with the cord and hose lengths above.

By InfinitePowerSolutions.com Technology Desk